View ZN458_719547.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

DS3025 - 2.1
ZN458
2.45V PRECISION REFERENCE REGULATOR
The ZN458 is a monolithic integrated circuit providing a precise stable reference source of 2.45V in a two lead package without the need for an external shaping capacitor.
+VE -VE
FEATURES
s s s s s s s s s Guaranteed 5mV Maximum Deviation over Full Temperature Range Low Temperature Coefficient 0.003%/C Low Slope Resistance - 0.1 Ohms Very Good Long Term Stability - 10ppm Low Noise - 10 microvolts Internally Shaped Tight Tolerance 1.43% Two Pin Package Wide Operating Current 2-120mA
VS VS - VREF R= IREF R VREF
CM2
Fig.1 Pin connection - bottom view
ABSOLUTE MAXIMUM RATINGS
Dissipation Operating temperature range Storage temperature range 300mW -20C to +70C -55C to +150C
AV +VE
ORDERING INFORMATION
Device ZN458 ZN458A ZN458B TC (ppm/C) 99 49 29 Temperature range -20C to +70C -20C to +70C -20C to +70C
BAND GAP REFERENCE -VE GND
Fig.2 Circuit diagram
ZN458
ELECTRICAL CHARACTERISTICS (at Tamb = 25C unless otherwise specified)
Parameter Output voltage Slope resistance Reference current Maximum change in VREF ZN458 ZN458A ZN458B RMS noise voltage 1Hz-10kHz VREF drift at 70C Symbol VREF RREF IREF Min. 2.42 2.0 Typ. 2.45 0.1 10 6 4 10 10 Max. 2.49 0.2 120 22 11 6.5 Units V mA mV mV Test conditions Measured at 2mA
VREF
-20 to +70C
V ppm/1000 hours
10
DYNAMIC IMPEDANCE (ohms)
IREF = 2mA 1.0
IREF = 20mA
0.1 0.1
1.0 FREQUENCY (kHz)
10
100
Fig.3 Dynamic impedance
2
ZN458
10 8
CHANGE IN REFERENCE VOLTAGE, V (mV)
10-1
FORWARD CURRENT (A)
6 4 2 0 -2 -4 ZN458 -6 -8
10-2
10-3
10-4 0.4
0.8 1.2 1.6 2.0 2.4 FORWARD VOLTAGE (V)
2.8
-10
0
10
20 30 40 50 60 TEMPERATURE (C)
70
80
Fig.4 Forward characteristic
Fig.5 Temperature characteristic (typical)
5 4
CHANGE IN REFERENCE VOLTAGE, V (mV)
5 4
CHANGE IN REFERENCE VOLTAGE, V (mV)
3 2 1 0 -1 -2 -3 ZN458A -4 -5
3 2 1 0 -1 -2 ZN458B -3 -4 -5
0
10
20 30 40 50 60 TEMPERATURE (C)
70
80
0
10
20 30 40 50 60 TEMPERATURE (C)
70
80
Fig.6 Temperature characteristic (typical)
Fig.7 Temperature characteristic (typical)
3
ZN458
140
120
100 80 IREF (max.) 75 (mA) 60
40
20 0 -30
-20
-10
0
10
20 25 30
40
50
60
70
AMBIENT TEMPERATURE (C)
Fig.8 Derating curve
4
ZN458
5
ZN458
HEADQUARTERS OPERATIONS GEC PLESSEY SEMICONDUCTORS Cheney Manor, Swindon, Wiltshire SN2 2QW, United Kingdom. Tel: (0793) 518000 Fax: (0793) 518411 GEC PLESSEY SEMICONDUCTORS P.O. Box 660017 1500 Green Hills Road, Scotts Valley, California 95067-0017, United States of America. Tel: (408) 438 2900 Fax: (408) 438 5576
CUSTOMER SERVICE CENTRES * FRANCE & BENELUX Les Ulis Cedex Tel: (1) 64 46 23 45 Fax : (1) 64 46 06 07 * GERMANY Munich Tel: (089) 3609 06-0 Fax : (089) 3609 06-55 * ITALY Milan Tel: (02) 66040867 Fax: (02) 66040993 * JAPAN Tokyo Tel: (03) 5276-5501 Fax: (03) 5276-5510 * NORTH AMERICA Integrated Circuits and Microwave Products Scotts Valley, USA Tel (408) 438 2900 Fax: (408) 438 7023. Hybrid Products, Farmingdale, USA Tel (516) 293 8686 Fax: (516) 293 0061. * SOUTH EAST ASIA Singapore Tel: (65) 3827708 Fax: (65) 3828872 * SWEDEN Stockholm, Tel: 46 8 702 97 70 Fax: 46 8 640 47 36 * UK, EIRE, DENMARK, FINLAND & NORWAY Swindon Tel: (0793) 518510 Fax : (0793) 518582 These are supported by Agents and Distributors in major countries world-wide.
(c) GEC Plessey Semiconductors 1994 Publication No. DS3025 Issue No. 2.1 January 1994
This publication is issued to provide information only which (unless agreed by the Company in writing) may not be used, applied or reproduced for any purpose nor form part of any order or contract nor to be regarded as a representation relating to the products or services concerned. No warranty or guarantee express or implied is made regarding the capability, performance or suitability of any product or service. The Company reserves the right to alter without prior knowledge the specification, design or price of any product or service. Information concerning possible methods of use is provided as a guide only and does not constitute any guarantee that such methods of use will be satisfactory in a specific piece of equipment. It is the user's responsibility to fully determine the performance and suitability of any equipment using such information and to ensure that any publication or data used is up to date and has not been superseded. These products are not suitable for use in any medical products whose failure to perform may result in significant injury or death to the user. All products and materials are sold and services provided subject to the Company's conditions of sale, which are available on request.
6
http://www.mitelsemi.com
World Headquarters - Canada Tel: +1 (613) 592 2122 Fax: +1 (613) 592 6909 North America Tel: +1 (770) 486 0194 Fax: +1 (770) 631 8213 Asia/Pacific Tel: +65 333 6193 Fax: +65 333 6192 Europe, Middle East, and Africa (EMEA) Tel: +44 (0) 1793 518528 Fax: +44 (0) 1793 518581
Information relating to products and services furnished herein by Mitel Corporation or its subsidiaries (collectively "Mitel") is believed to be reliable. However, Mitel assumes no liability for errors that may appear in this publication, or for liability otherwise arising from the application or use of any such information, product or service or for any infringement of patents or other intellectual property rights owned by third parties which may result from such application or use. Neither the supply of such information or purchase of product or service conveys any license, either express or implied, under patents or other intellectual property rights owned by Mitel or licensed from third parties by Mitel, whatsoever. Purchasers of products are also hereby notified that the use of product in certain ways or in combination with Mitel, or non-Mitel furnished goods or services may infringe patents or other intellectual property rights owned by Mitel. This publication is issued to provide information only and (unless agreed by Mitel in writing) may not be used, applied or reproduced for any purpose nor form part of any order or contract nor to be regarded as a representation relating to the products or services concerned. The products, their specifications, services and other information appearing in this publication are subject to change by Mitel without notice. No warranty or guarantee express or implied is made regarding the capability, performance or suitability of any product or service. Information concerning possible methods of use is provided as a guide only and does not constitute any guarantee that such methods of use will be satisfactory in a specific piece of equipment. It is the user's responsibility to fully determine the performance and suitability of any equipment using such information and to ensure that any publication or data used is up to date and has not been superseded. Manufacturing does not necessarily include testing of all functions or parameters. These products are not suitable for use in any medical products whose failure to perform may result in significant injury or death to the user. All products and materials are sold and services provided subject to Mitel's conditions of sale which are available on request.
M Mitel (design) and ST-BUS are registered trademarks of MITEL Corporation Mitel Semiconductor is an ISO 9001 Registered Company Copyright 1999 MITEL Corporation All Rights Reserved Printed in CANADA TECHNICAL DOCUMENTATION - NOT FOR RESALE

▲Up To Search▲

Price & Availability of ZN458

	To Download ZN458 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .